Richmond Professional Landscaping installs garden fencing across Richmond upon Thames, building boundaries for commercial sites, rental properties and family homes from East Sheen to Teddington. APL accredited and TrustMark registered, the company has spent 29 years putting up fences that stay straight through the stormiest winters. Behind that sit more than 930 completed projects across the borough.
Most fence failures start at ground level, where rotting posts or shallow footings give way in high winds. Concrete or pressure-treated timber posts set in post mix, gravel boards that keep panels off damp soil and sensible post spacing all make a fence last far longer. Featheredge boards and rails are fixed with galvanised nails, so nothing rusts or loosens.
Closeboard, overlap panels, slatted screens and timber gates each suit a different garden, budget and level of privacy. Rear fences up to 2 metres high usually need no planning permission. Every quote also comes itemised, so the cost per metre is clear from the start.

A straight, solid boundary starts with what goes into the ground. New garden fence installation sets every post at the right depth and spacing for the fence height and wind exposure.
Gravel boards along the base keep timber off damp soil, which adds years to the panels. We also check access and the fence line with neighbours in mind before the first hole is dug.

Leaning posts, split panels and storm damage are the usual reasons people call. Garden fence replacement and repairs start with working out which sections are worth keeping and which need to go.
Loose panels often just need new fixings, while rotten posts come out completely and are replaced. Our installers fit the new sections to line up neatly with the old ones.

Closeboard fencing uses vertical featheredge boards nailed to horizontal rails, which makes it far stronger than lightweight overlap panels. It also follows awkward boundary lengths without the need for cut panels.
Pressure-treated timber and good clearance from the soil decide how long any timber and closeboard fencing lasts. We use galvanised nails and fixings throughout, so nothing rusts or works loose early.

Being overlooked by neighbours or a shared path is one of the most common complaints on Richmond streets. Privacy fencing and garden screening blocks those sightlines with taller panels, slatted screens or trellis toppers.
Solid panels catch more wind than slatted designs, so footings are sized to match. Screening often forms part of wider garden makeovers, so we check any old wall or fence first.

A gate takes far more punishment than the fence around it, opening and closing several times a day. Garden gate installation starts with strong posts, since a heavy gate pulls hardest on its hinge side.
Hinges and latches are set so the gate swings freely without scraping the path or catching the fence. If existing posts are weak, our installers replace them before hanging the new gate.

Sloping gardens seldom suit standard panels straight out of the pack. Sloping and bespoke garden fencing uses stepped panels with level tops, or raked fencing that follows the gradient.
Gaps beneath stepped panels are filled with gravel boards, so pets and draughts stay out. Richmond Professional Landscaping also sets posts around tree roots, walls and other fixed features rather than through them.
Proven local experience: Fence lines across the borough are set out to follow changing ground levels, mature planting and tight side returns. Every boundary is measured twice before the first post goes in.
Residential and commercial fencing: Private gardens, rental properties, schools and business premises all get the same careful build. Boundary fencing, privacy screens and access gates are all handled in-house.
Storm-proof replacements: Storm-damaged panels and full perimeter runs are rebuilt on deeper, sturdier footings. Concrete posts go in wherever wind exposure calls for extra strength. Panels are fixed so they flex in strong gusts rather than snapping.
Local site knowledge: Richmond Professional Landscaping knows the borough's clay soils, mature tree roots and narrow side passages well. Footings and access are planned around them from the first visit.
Richmond Professional Landscaping walk the boundary line first, checking ground levels and spotting tree roots or underground services. Ownership of the boundary is confirmed with you before any work is planned.
Fence style, panel height, post type, gravel boards and gates are then agreed together. Our installers set post spacing and depths to suit the ground and how exposed the garden is to wind.
Old or damaged fencing is taken down and any vegetation blocking the line is cleared. We then mark out each post position with string lines.
Posts go into concrete footings at the right depth, followed by gravel boards and panels or featheredge boards. We check alignment and spacing as each section goes up.
Every post, panel and gate is checked for alignment, stability and smooth latching. Our crew then clears all offcuts and old fencing, leaving the garden tidy.
Fencing is usually priced by the metre, so the length of the boundary drives most of the bill. A 10 metre run typically comes to £900 to £1,500 once materials, labour and waste disposal are added, with London rates at the upper end of the scale. A 20 metre boundary usually falls between £1,750 and £3,200.
Element
| Installed Cost | What's Included
|
|---|---|---|
Overlap panel fence | £90 to £110 per metre | Overlap panels on timber posts, including fitting and fixings. |
Closeboard fence with concrete posts | £130 to £160 per metre | Featheredge boards on concrete posts with gravel boards, fully installed. |
Removing an old fence usually adds £15 to £30 per metre, and a new timber gate typically costs £80 to £250 on top. Richmond Professional Landscaping sets out labour, materials and clearance separately in every written quote.
We install closeboard, overlap panel, slatted and trellis fencing, along with timber gates and security fencing. Installed prices typically run from £90 to £160 per metre, depending on the style and post type. Gates and old fence removal are quoted as separate items.
Concrete posts last far longer and will not rot, which makes them ideal for exposed gardens. Timber posts look softer and suit closeboard fencing, but they usually need replacing sooner. Concrete posts with timber panels give a good balance of strength and looks.
Yes, we install fencing for offices, schools, shops and managed residential sites as well as private homes. Commercial jobs are planned around opening hours and site access. Security fencing and lockable gates are available for sites that need extra protection.
If most posts are sound, replacing damaged panels or boards is usually the cheaper option. Where several posts are rotten or leaning, a full replacement saves money in the long run. A quick inspection at the first visit shows which option makes more sense.
Most residential fence runs take 1 to 3 working days. Boundary length, soil conditions, old fence removal and the weather all affect the timeline. Every timeline is confirmed in writing with the quote.
Fences up to 2 metres high usually fall under permitted development, or 1 metre where they sit next to a road used by vehicles. Listed buildings and some conservation areas have extra restrictions, which are checked before work starts. Trellis added on top of a fence usually counts towards the overall height.
Responsibility is usually set out in the property deeds, often shown by T marks on the title plan facing into the owner's side. Where nothing is recorded, neighbours often agree to share the cost of a new fence. A new fence is normally built on the owner's side of the boundary line.